electronics-journal.com
19
'26
Written on Modified on
Silicon Carbide Power Module Targets 1,200 A Heavy-Duty Truck Inverters
Infineon’s new module pairs 1,400V silicon carbide MOSFETs with .XT interconnection technology for electric truck and bus drivetrains targeting lifetimes beyond 1.2 million kilometres.
www.infineon.com

HybridPACK™ HD is a dedicated power module for drivetrain inverters in electric commercial vehicles.
Infineon Technologies has introduced HybridPACK HD, a dedicated power module for drivetrain inverters in electric commercial vehicles, covering heavy-duty applications from long-haul transport to city distribution, including electric buses and coaches. Based on 1,400V CoolSiC MOSFETs and .XT interconnection technology, the module delivers output RMS currents of up to 1,200 A and is designed to meet lifetime requirements of more than 1.2 million kilometres.
Reliability requirements in electric commercial vehicle drivetrains
Manufacturers of electric commercial vehicles face stringent performance and reliability demands, including harsh vibration environments, intense power cycling and operating lifetimes exceeding 80,000 hours. HybridPACK HD extends Infineon’s existing HybridPACK portfolio to address these heavy-duty requirements.
1,400V CoolSiC MOSFETs and .XT interconnection technology
The module delivers an output RMS current from 500 A up to 1,200 A and is designed to meet lifetime requirements of more than 1.2 million kilometres. It is based on Infineon’s .XT interconnection technology, which supports high reliability and long service life, and on 1,400V CoolSiC MOSFETs. This combination enables compact inverter designs without the need to parallel multiple power modules.
Low-inductance design and direct liquid cooling
Optimised for silicon carbide performance, HybridPACK HD features a low-inductance design and efficient thermal management to support high-current switching. Cooling and system integration capabilities, including direct liquid cooling, increase robustness in demanding heavy-duty applications and contribute to a lower total cost of ownership for manufacturers and fleet operators.
Prepared for 1,500V DC battery systems and megawatt charging
The module supports battery voltages of up to 1,500V DC. This allows future megawatt charging to be supported without the need for a redesign and helps prepare vehicle platforms for higher-voltage architectures and faster charging.
Additional Context
This section details technical specifications and competitive benchmarking not included in the original news release.
Among silicon carbide traction modules, onsemi’s EliteSiC NVVR26A120M1WSB is a half-bridge module with two 1,200V SiC MOSFETs and a typical on-resistance of 2.6 mΩ, designed for hybrid and electric vehicle traction inverters. With 1,400V CoolSiC MOSFETs, HybridPACK HD is built for a higher blocking voltage class, supporting battery voltages of up to 1,500V DC on heavy-duty commercial vehicle platforms.
Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.
Infineon Technologies has introduced HybridPACK HD, a dedicated power module for drivetrain inverters in electric commercial vehicles, covering heavy-duty applications from long-haul transport to city distribution, including electric buses and coaches. Based on 1,400V CoolSiC MOSFETs and .XT interconnection technology, the module delivers output RMS currents of up to 1,200 A and is designed to meet lifetime requirements of more than 1.2 million kilometres.
Reliability requirements in electric commercial vehicle drivetrains
Manufacturers of electric commercial vehicles face stringent performance and reliability demands, including harsh vibration environments, intense power cycling and operating lifetimes exceeding 80,000 hours. HybridPACK HD extends Infineon’s existing HybridPACK portfolio to address these heavy-duty requirements.
1,400V CoolSiC MOSFETs and .XT interconnection technology
The module delivers an output RMS current from 500 A up to 1,200 A and is designed to meet lifetime requirements of more than 1.2 million kilometres. It is based on Infineon’s .XT interconnection technology, which supports high reliability and long service life, and on 1,400V CoolSiC MOSFETs. This combination enables compact inverter designs without the need to parallel multiple power modules.
Low-inductance design and direct liquid cooling
Optimised for silicon carbide performance, HybridPACK HD features a low-inductance design and efficient thermal management to support high-current switching. Cooling and system integration capabilities, including direct liquid cooling, increase robustness in demanding heavy-duty applications and contribute to a lower total cost of ownership for manufacturers and fleet operators.
Prepared for 1,500V DC battery systems and megawatt charging
The module supports battery voltages of up to 1,500V DC. This allows future megawatt charging to be supported without the need for a redesign and helps prepare vehicle platforms for higher-voltage architectures and faster charging.
Additional Context
This section details technical specifications and competitive benchmarking not included in the original news release.
Among silicon carbide traction modules, onsemi’s EliteSiC NVVR26A120M1WSB is a half-bridge module with two 1,200V SiC MOSFETs and a typical on-resistance of 2.6 mΩ, designed for hybrid and electric vehicle traction inverters. With 1,400V CoolSiC MOSFETs, HybridPACK HD is built for a higher blocking voltage class, supporting battery voltages of up to 1,500V DC on heavy-duty commercial vehicle platforms.
Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.
www.infineon.com

