Join the 155,000+ IMP followers

electronics-journal.com

2W Isolated Gate-Drive Supplies Cut Noise Coupling in SiC Converters 

Murata’s MGJ2T2 series provides bipolar +18V/-3V outputs and reinforced insulation for SiC MOSFET gate drivers in energy storage, motor drives and EV charging.

  www.murata.com
2W Isolated Gate-Drive Supplies Cut Noise Coupling in SiC Converters

Murata Manufacturing has introduced the MGJ2T2 series of 2W isolated DC-DC converters in SIP packages, designed to supply gate drivers for silicon carbide (SiC) MOSFETs in high-voltage power applications. The converters combine 6kVDC isolation with an isolation capacitance of 2.5pF and common-mode transient immunity (CMTI) above 200kV/µs.

Bipolar Outputs for SiC MOSFET Gate Drivers
The MGJ2T2 series operates from a 24V input and provides +18V/-3V bipolar outputs for SiC MOSFET gate drivers. The positive rail supplies the voltage required to turn the power device on, while the negative rail supports reliable turn-off.

Low Isolation Capacitance Against Switching Noise
Fast switching in SiC-based power converters produces rapid voltage changes that can couple electrical noise across the isolation barrier between the power stage and its control circuitry. The 2.5pF isolation capacitance of the MGJ2T2 series limits this coupling, while CMTI of more than 200kV/µs allows the converter to tolerate rapid common-mode voltage transitions. Together, these characteristics help maintain separation between the high-voltage switching environment and the low-voltage control electronics.

Block-Coil Construction and Insulation Ratings
The converters use Murata’s proprietary Block-Coil technology, in which separate windings are formed on solid insulating formers. This physically separates the primary and secondary circuits while reducing the capacitance between them. The construction provides more than 8mm of creepage and clearance, and the solid insulation barrier offers high partial-discharge tolerance.

The series supports reinforced insulation at working voltages up to 800Vrms, or basic insulation up to 1600Vrms, and is tested to withstand 6kVDC across the isolation barrier. It is designed to meet IEC 60664-1. These ratings allow the gate-drive supply to operate where the control electronics and the SiC power stage are at substantially different voltage potentials.

Solid-State Transformers and Further Applications
The same characteristics are relevant to emerging solid-state transformer (SST) architectures. SSTs use high-frequency power conversion and can divide high input voltages across multiple cascaded switching stages. Each switching element requires an isolated gate-drive power supply, which makes isolation and noise immunity between the individual power stages and their control circuitry particularly important.

The MGJ2T2 series operates over a temperature range of -40°C to +125°C. Target applications include energy storage systems (ESS) and battery energy storage systems (BESS), microgrids, motor drives, industrial automation, EV charging and heat pumps.

Additional Context
This section details technical specifications and competitive benchmarking not included in the original news release.

RECOM’s RxxP2xxyyD series is a comparable 2W SIP7 DC-DC converter range for SiC MOSFET gate drivers. It provides asymmetric outputs of +20/-5V or +15/-3V from input options of 5, 12, 15 or 24V, with 6400VDC isolation and an isolation capacitance below 10pF. The MGJ2T2 series, by comparison, delivers +18V/-3V from a 24V input, with 6kVDC isolation and an isolation capacitance of 2.5pF.

Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.

www.murata.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers